In vitro study examines posterior torque impact on 3D mechanics of anterior teeth in clear aligner treatment.

INTRODUCTION: This study utilizes investigate the impact of posterior torques on the three-dimensional force exerted on the lower anterior teeth during the retraction in orthodontic clear aligners treatment. METHODS: Four groups of mandibular dental arch light-cured resin models will be created, including: mandibular posterior teeth with standard torque, mandibular posterior teeth with labial torque, and mandibular posterior teeth with lingual torque. Each group will consist of 12 sets of clear aligners. The aligners will be worn, and measurements will be taken using the six-axis measurement platform to evaluate the three-dimensional force exerted on the lower anterior teeth under various initial torques applied to the mandibular posterior teeth. SPSS 26.0 used for ANOVA analysis, α = 0.05 significance level. RESULTS: Comparing mandibular posterior teeth with standard torque to those with labial torque, no statistically significant changes were observed in buccolingual force. In the mesiodistal direction, mandibular incisors exhibited a significant decrease in distal force, while canines showed a significant increase. Both findings had a significance level of P < 0.05; Lingual torque on mandibular posterior teeth, compared to standard torque, led to a significant increase in lingual force for incisors and a significant increase in labial force for canines in the buccolingual direction (P < 0.05). Additionally, mandibular incisors exhibited a significant decrease in distal force in the mesiodistal direction (P < 0.05). CONCLUSION: Varying initial torques on mandibular posterior teeth significantly impact force on lower anterior teeth. Labial torque reduces lingual force on incisors and increases distal force on canines. Lingual torque increases lingual force on incisors and labial force on canines.

Efficacy of clear aligner wear protocols in orthodontic tooth movement-a systematic review.

BACKGROUND AND OBJECTIVES: Different expedited aligner wear protocols are currently in practice. This review was undertaken to systematically appraise the available evidence on the comparative efficacy of orthodontic tooth movement (OTM) across the different wear protocols. SEARCH METHODS: Two assessors conducted comprehensive searches of electronic databases, including MEDLINE (via PubMed), Scopus, Embase, Web of Science, Google Scholar, Directory of Open Access Journals, Cochrane Library, OpenGrey, and Clinical Trial Registry, till 18 February 2024. Titles and abstracts were independently screened. SELECTION CRITERIA: Prospective or retrospective studies comparing expedited wear protocols with the conventional 14-day protocol were included. DATA COLLECTION AND ANALYSIS: A pre-piloted data extraction form was used. Risk of bias (RoB) assessment employed the Cochrane RoB 2.0 tool for randomized-controlled trials (RCTs) and the Newcastle-Ottawa scale for non-RCTs. The quality of evidence was evaluated using the Grading of Recommendations, Assessment, Development, and Evaluation Pro tool. RESULTS: Six studies, including 3 RCTs and 3 non-RCTs, were selected from 9076 records. Four studies (two RCTs and two retrospective cohort) found no statistically significant difference (P > 0.05) in the OTM efficacy between expedited and conventional protocols. Two studies (one RCT and one prospective cohort) found greater efficacy (P < 0.05) with the 14-day protocol, with the RCT reporting greater efficacy for certain movements, such as maxillary posterior intrusion, maxillary posterior distal tipping and buccal torquing, and mandibular posterior intrusion and extrusion. One RCT reported statistically insignificant difference (P > 0.05) in pain perception between the 10-day and 14-day protocols. Two studies demonstrated low RoB, two moderate, and two high RoB. The evidence level was very-low for OTM efficacy and high for pain perception. Meta-analysis was precluded due to significant heterogeneity among the studies. CONCLUSIONS: Within the limitations of the study, the 7-day, 10-day, and 14-day protocols did not show any significant difference in OTM efficacy, except for certain movements that exhibited superior outcomes with the 14-day wear. Hence, a 'hybrid aligner-wear protocol', based on clinical judgement, might serve a better alternative in complex situations. REGISTRATION: PROSPERO CRD42021288179.

Histological Evaluation of the Effect of Alendronate on the Maxillary Bone of Wistar Rats Combined with Orthodontic Movement of Intense Force / Evaluación Histológica del Efecto del Alendronate en el Hueso Maxilar de Ratas Wistar Combinado con Movimiento de Ortodoncia de Fuerzas Intensas

SUMMARY: To evaluate the histological adverse effects of alendronate administered systemically and topically in combination with orthodontic movement by intense force. Thirty-six 24-week-old female Wistar rats, ovariectomized, were used and divided into three groups (n = 12/group): control, locally treated with saline (0.07 ml/kg/week) (group 1) and experimental, treated with alendronic acid systemically (0.07 mg/kg/week) (group 2) and locally (7 mg/kg/week) (group 3). At 14 days, an orthodontic anchor was installed in the right first molar, and a force of 144 cN was applied for 28 days. The samples were processed for histological evaluation. Descriptive statistics, Shapiro-Wilk tests, one-way ANOVA with Bonferroni correction, one-way repeated measures ANOVA and chi-square tests were performed. All tests were statistically significant at p <0.05. The adverse events found in all groups were inflammation and osteoclastic activity. In the bisphosphonate-treated groups, there were statistically significant differences (p = 0.005) in the osteoclastic activity between the two hemiarcates. All rats in group 2 presented paralytic ileus. Compared to local administration, systemic treatment with alendronic acid produces more adverse effects, such as inflammation, fibrinoid necrosis, and osteoclastic activity. During the application of intense forces, it was not possible to show that there is necrosis associated with bisphosphonates.

Evaluar los efectos adversos histológicos del alendronato administrado sistémica y tópicamente en combinación con movimientos ortodóncicos de fuerza intensa. Treinta y seis ratas Wistar hembras de 24 semanas de edad, ovariectomizadas, fueron utilizadas y divididas en tres grupos (n = 12/grupo): control, tratado localmente con solución salina (0,07 ml/kg/semana) (grupo 1) y experimental, tratados con ácido alendrónico por vía sistémica (0,07 mg/kg/semana) (grupo 2) y local (7 mg/kg/semana) (grupo 3). A los 14 días se instaló un anclaje de ortodoncia en el primer molar derecho y se aplicó una fuerza de 144 cN durante 28 días. Las muestras fueron procesadas para evaluación histológica. Se realizó estadística descriptiva, pruebas de Shapiro-Wilk, ANOVA de una vía con corrección de Bonferroni, ANOVA de medidas repetidas de una vía y pruebas de chi-cuadrado. Todas las pruebas fueron estadísticamente significativas con un p <0,05. Los eventos adversos encontrados en todos los grupos fueron inflamación y actividad osteoclástica. En los grupos tratados con bisfosfonatos hubo diferencias estadísticamente significativas (p = 0,005) en la actividad osteoclástica entre los dos hemiarcados. Todas las ratas del grupo 2 presentaron íleo paralítico. En comparación con la administración local, el tratamiento sistémico con ácido alendrónico produce más efectos adversos, como inflamación, necrosis fibrinoide y actividad osteoclástica. Durante la aplicación de fuerzas intensas, no fue posible demostrar que existe necrosis asociada con los bisfosfonatos.

Channa Striata and Hyperbaric Oxygen Therapy Combination for Pressure Areas in Orthodontic Treatment

ABSTRACT Objective: To study the effect of using a combination of Channa Striata gel and hyperbaric oxygen therapy on pressure areas during orthodontic treatment. Material and Methods: The study was conducted using the ARRIVE Essential 10 guidelines. In this study, 35 3-4 months male guinea pigs (Cavia Cobaya) weighing 300-400 grams were used and divided into 5 groups (n=7). Decalcification was performed to dissolve the dental calcium and jawbone to cut the tissue properly. The decalcification was performed for 30 days. Then preparations were made with HE (Hematoxylin Eosin), observed using a microscope, and counted the number of osteoclasts and macrophages on a light microscope with 400 times magnification. The results of the preparations were analyzed using the SPSS program. Results: The Kruskal-Wallis test of macrophage cells and the ANOVA test of osteoclast cells showed significant results between all groups (p<0.05). Conclusion: The effect of hyperbaric oxygen therapy 2,4 ATA administered on days 8-14 and Channa Striata extract gel administered on days 3-14 can increase the number of macrophages in the periodontal ligament and osteoclasts in the alveolar bone in the pressure area during orthodontic tooth movement.

Effects of Skeletally Supported Anterior en Masse Retraction with Varied Lever Arm Lengths and Locations in Lingual Orthodontic Treatment: A 3D Finite Element Study.

OBJECTIVE: This study is aimed at analyzing different points of force application during miniscrew supported en masse retraction of the anterior maxillary teeth to identify the best line of action of force in lingual orthodontic treatment. MATERIALS AND METHODS: Three-dimensional (3D) finite element models were created to stimulate en masse retraction with different heights and positions of the miniscrew and lever arm to change the force application points; a 150 g retraction force was applied from the miniscrew to the lever arms, and the initial tooth displacements were analyzed. RESULTS: Lingual crown tipping and occlusal crown extrusion were seen at all heights and positions of the miniscrew and lever arm, but when the miniscrew height was at 8 mm and the power arm was located between the lateral incisors and canines, these tipping patterns were less than those obtained with a 4.5 mm high miniscrew and a lever arm located distal to the canines. CONCLUSION: All miniscrew heights and lever arm positions showed initial lingual crown tipping and labial root tipping with occlusal crown extrusion. However, the 8 mm miniscrew height and the lever arm located between the lateral incisor and canine showed fewer amounts of these tipping patterns than a 4.5 mm miniscrew height and lever arm located distal to the canines. Therefore, this could be the preferred point of force application during en masse retraction in lingual treatment with additional torque control methods.

Profiles of inflammation factors and inflammatory pathways around the peri-miniscrew implant.

BACKGROUND: Peri-miniscrew implant is a temporary assistant armamentarium for the treatment of severe malocclusion and complex tooth movement, the inflammation around it is the main reason for the failure of orthodontic treatment due to the implant loosening and falling out. Inflammation around the peri-miniscrew implant is associated with the release of pro-inflammatory cytokines. These pro-inflammatory cytokines, in turn, recruit immune cells (such as macrophages, dendritic cells, T cells, and B cells), which can produce and release inflammatory biomarkers, regulate the interaction between immune cells, periodontal ligament cells, osteoblasts, and so on. However, there is currently no effective clinical treatment plan to prevent inflammation around implants. PURPOSE: To investigate the potentially essential factors in the inflammatory response around the peri-miniscrew implant and explore the signaling pathways involved. METHODS: Here, we review the studies focused on inflammatory biomarkers (Interleukins, tumor necrosis factor-α (TNF-α), receptor activator of NF-κB ligand (RANKL), matrix metalloproteinases (MMPs), and cellular adhesion molecules (CAMs)) in peri-miniscrew implant crevicular fluid (PMICF), as well as inflammatory signaling pathways (Wnt5a, JNK, Erk1/2, NF-κBp65 and TAB/TAK) in periodontal cells from 1998 to 2020. RESULTS: A literature search revealed TLR-2, TLR-4, LOX-1, and BMPs are involved in regulating ILs (IL-1ß, IL-6, IL-8, and IL-17), TNF-α, RANKL, MMP-2, MMP-9 expression via JNK, Erk1/2, Wnt5a, NF-κBp65, OPN, and TAB/TAK signaling pathways. Among them, IL-1ß and IL-6 are the critical inflammation factors in the signaling pathways inducing the inflammatory reaction surrounding implants. Besides, CAM-1 was also regulated by MMP-9 and IL-17. CONCLUSION: There are considerable potential factors involving regulating inflammatory biomarkers on downstream signaling pathways in peri-minisrew implant crevicular fluid. CLINICAL SIGNIFICANCE: This review provides the substantiation of these cell factors and signaling pathways around peri-miniscrew implants, proposes more practical clinical therapeutic ideas and schemes for improving the stability and clinical efficacy of peri-miniscrew implants.

Miniscrew-supported pole technique: Surgical-orthodontic approach for impacted or retained second molars in adolescents.

BACKGROUND: Several treatment options have been proposed for the treatment of eruption disturbances of permanent molars. Despite being an infrequent condition, these disturbances should be solved as they can lead to important complications and play a relevant role in completing the occlusion. FINDINGS: The presented cases involved maxillary and mandibular included second molars (M2s) respectively. Both teeth erupted successfully after the application of the miniscrew-supported pole technique, and a functional occlusion was established. CONCLUSIONS: This technique is a surgically assisted orthodontic procedure performed to force the eruption of impacted/retained M2s. This device uses one mesial miniscrew which allows the application of relevant force to achieve the eruption of complicated retained/impacted M2s within a short period of time.

Comparative assessment of the rate of orthodontic tooth movement in adolescent patients undergoing treatment by first bicuspid extraction and en mass retraction, associated with low-frequency mechanical vibrations in passive self-ligating and conventional brackets: A randomized controlled trial.

BACKGROUND: Low-frequency vibrations are one of the many non-surgical modalities aimed at increasing the rate of orthodontic tooth movement. OBJECTIVE: The present trial was conducted to assess the efficacy of low-frequency vibrations in increasing the rate of orthodontic tooth movement in adolescent patients undergoing fixed mechanotherapy with passive self-ligating brackets and conventional brackets. MATERIALS AND METHODS: Setting and sample population: department of orthodontics and dentofacial orthopaedics in a nationally accredited dental college. Participants, study design and methods: 65 patients were randomly allocated to three groups. Two experimental groups consisted of passive self-ligating and conventionally ligated appliances received low-frequency vibrations. The control group did not receive any vibrations. Allocation ratio was 1:1:1.32. Eligibility criteria: adolescent patients with sound and healthy dentition, incisor irregularity<5mm. PRIMARY OUTCOME: rate of orthodontic tooth movement in mm/month. Randomization and blinding: computer-generated random allocation sequencing was done and data assessor was blinded. STATISTICS: the Q-Q plot and Shapiro-Wilks test judged the normality of the data. The parametric test included ANCOVA and post-hoc analysis. RESULTS: No statistically significant enhancement of tooth movement was seen in the experimental groups, when comparison was done with the control group P>0.05. Comparison between the two experimental groups did not reveal any significant difference either. CONCLUSION: No statistically significant increase of orthodontic tooth movement was seen with low-frequency vibrations and the mode of ligation did not have any effect in increasing the rate of tooth movement either.

Consecutive use of mini-implants in the palate to treat skeletal maxillary constriction and Class II malocclusion in an adult case.

This report describes the successful use of two multifunctional mini-implants that were inserted into the palate in the treatment of an 18-year-old woman in whom the maxilla was skeletally narrowed and the molars have migrated mesially on both sides. Three different appliances were used in sequence in the course of treatment: first, an appliance supported by bone and teeth (hybrid hyrax) for surgically-assisted rapid maxillary expansion (SARME); second, a distalization device supported by mini-implants to achieve molar distalization; and third, a transpalatal arch (TPA) stabilized by mini-implants to allow indirect anchorage during retraction of the incisors. The mini-implants in the palate led to a reduction in the adverse effects of the SARME procedure and made treatment with cervical headgear unnecessary. TPA stabilized by the mini-implant was also used to retract the anterior teeth en masse, with no need for alterations in the treatment mechanism and using routine orthodontic methods.

Simulation of miniscrew-root distance available for molar distalization depending on the miniscrew insertion angle and vertical facial type.

OBJECTIVE: The purpose of this study was to evaluate the effects of miniscrew insertion angle and vertical facial type on the interradicular miniscrew-root distance available for molar distalization. MATERIALS AND METHODS: Cone-beam computed tomography images of 60 adults with skeletal Class I occlusion exhibiting hyperdivergent (n = 20), normodivergent (n = 20), and hypodivergent (n = 20) facial types were used. Placement of a 6-mm long, 1.5-mm diameter, tapered miniscrew was simulated at a site 4 mm apical to the cementoenamel junction, with insertion angles of 0°, 30°, 45°, and 60° relative to the transverse occlusal plane. The shortest linear distance between the miniscrew and anterior root at four interradicular sites was measured: maxillary second premolar and first molar (Mx 5-6), maxillary first and second molars (Mx 6-7), mandibular second premolar and first molar (Mn 5-6), and mandibular first and second molars (Mn 6-7). RESULTS: Miniscrew-root distance significantly increased as the insertion angle increased from 0° to 60°. In the mandible, the distances significantly differed among vertical facial types, increasing in the following order: hyperdivergent, normodivergent, and hypodivergent. The minimum mean distance was found in the Mx 6-7 (30°; 0.86±0.35 mm), and the maximum mean distance was found in the Mn 5-6 (60°; 2.64±0.56 mm). The rates of miniscrews located buccally outside the root distalization path were up to 70% and 55% when the miniscrews were placed at 60° insertion angles in the Mx 5-6 and Mn 5-6 regions, respectively. CONCLUSIONS: Miniscrew-root distance increased significantly with the increased insertion angle, and the amount of increase was affected by the miniscrew placement site and vertical facial type. To ensure adequate distalization of the posterior segment, the miniscrew should be inserted at an angle in the interradicular area between the second premolar and first molar.

Lower incisor extraction therapy in a complex case with an ankylosed tooth in an adult patient: A case report.

This case report describes a successful orthodontic therapy of an adult female treated by mandibular central incisor extraction and vestibular fixed appliances. The patient presented a skeletal Class I with normodivergent facial pattern, Class II subdivision dental relationship, extremely deep Curve of Spee and severe overbite. Moreover, during the treatment, the upper left first molar does not respond to orthodontic forces due to tooth ankylosis, augmenting the difficulty of this case. Despite this, a good occlusal relationship on both sites and an optimal extraoral outcome have been achieved after a 26-months therapy. To our knowledge no case report with such entity of Curve of Spee with contemporary tooth ankylosis has been presented.

Expansion treatment using Invisalign®: Periodontal health status and maxillary buccal bone changes. A clinical and tomographic evaluation.

The aim of this study was to evaluate changes in periodontal status and maxillary buccal bone by considering clinical and tomographic parameters during the first year of orthodontic expansion with Invisalign® aligners. Upper first (1PM) and upper second (2PM) premolars of 19 patients with orthodontic expansion requirement treated with Invisalign® aligners were evaluated. Plaque index (PI), gingival index (GI), probing pocket depth (PPD), clinical attachment level (CAL) and cone beam tomographic (CBCT) records were collected at 76 sites before starting treatment (T0) and at 12 months (T1). Bone height was measured from cementoenamel junction (CEJ) to the crest cortical bone (CC). Bone thickness was measured at two levels: 4 mm (CEJ+4) and 6 mm (CEJ+6) apical to the CEJ. A descriptive analysis was made of the variations of bone thickness and height in a series of cases. The average expansion was 1.93 mm for 1PM and 167 mm for 2PM. Arithmetic mean of distance CEJ-CC in 1PM was 3.05 mm at T0, and remained at 3.05 mm at T1. Arithmetic mean of distance CEJ-CC in 2PM was 2.06 mm at T0 and 2.31 at T1. Post-expansion, most of the analyzed sites (86%) exhibited a bone thickness of ≥0.5 mm. The greatest variations between T0 and T1 were observed at the level of 1PM CEJ+ 4 and 2PM CEJ+ 6. The minimal changes in the clinical records (GI, PI, PPD and CAL) between T0 and T1 were compatible with the maintenance of gingivalperiodontal health. Invisalign® for expansion movements did not produce substantial changes in the evaluated periodontal clinical parameters or in the bone measurements. Removable appliances reduce plaque retentive factors and favor adequate oral hygiene.

El objetivo de este estudio fue evaluar los cambios en el estado periodontal y hueso facial maxilar a través de parámetros clínicos y tomográficos durante la expansión ortodóncica con alineadores Invisalign® en el primer año de tratamiento. Se evaluaron los primeros (1PM) y segundos (2PM) premolares superiores pertenecientes a 19 pacientes con requerimiento de expansión ortodóncica tratados con alineadores Invisalign®. Se registraron los índices de placa (IP), índice gingival (IG), profundidad al sondaje (PS) y nivel de inserción (NI) y registros tomográficos de haz cónico (CBCT) en 76 sitios antes de comenzar el tratamiento (T0) y a los 12 meses (T1). Se midió la altura ósea desde el límite amelocementario (LAC) hasta la cortical de la cresta (CC) y el espesor en dos niveles; a 4 mm (LAC+4) y a 6 mm (LAC+6) hacia apical del LAC. Se realizó un análisis descriptivo de las variaciones de la altura y espesor óseo en una serie de casos. La expansión promedio para 1PM fue de 1,93 mm y para 2PM fue de 1,67 mm. La media aritmética de LAC-CC en primeros premolares fue de 3,05 mm en T0 y se mantuvo el valor de 3,05 mm en T1. La media aritmética de LAC-CC en segundos premolares fue de 2,06 mm en T0 y 2,31 en T1. Post expansión, la mayoría de los sitios (86%) analizados exhibieron un espesor óseo ≥0,5 mm. Las mayores variaciones entre T0 y T1 se observaron a nivel de 1PM CEJ+4 y 2PM CEJ+6. Los registros clínicos (PI, GI, PPD y CAL) evidenciaron mínimos cambios entre T0 y T1, compatibles con el mantenimiento de la salud gíngivo-periodontal. El uso de Invisalign ® para movimientos de expansión no produjo cambios sustanciales en los parámetros clínicos periodontales evaluados ni en las mediciones óseas. La aparatología removible reduce los factores retentivos de placa bacteriana y facilita una adecuada higiene oral.

Prospective clinical study of transverse development with orthodontics with self-ligating brackets.

Orthodontics with low friction, low force, passive self-ligating brackets produces alveolar-dental remodeling, resulting in an increase in the transverse diameter of the dental arches, especially in the premolar sector. The aim of this study was to compare the modifications of the transverse diameter in the pre- and post-dental alignment cast models with orthodontics with passive self-ligating brackets in patients with moderate to severe dental discrepancy. The study included 28 patients of both sexes aged 16 to 48 years with dental discrepancies between -6 and -16 mm, treated with self-ligating Damon brackets and thermally activated Nickel- Titanium-Copper arches. With a digital pachymeter, Mitutoyo brand, five measurements were taken per dental arch: distance between canines (C), first premolars (1PM), second premolars (2 PM), first molars (1M) and second molars (2M), before and after orthodontic alignment. The variations were statistically evaluated by Student T Test for paired samples. Average distance between teeth varied with dental alignment in both jaws. The greatest increases in transverse diameter were recorded in the premolar areas. Minor though statistically significant variations also occurred in the 2M of the maxilla and in the C of the mandible In alignment with passive self-ligating brackets, there is an increase in the transverse diameter due to the development of the dental arches, mainly in the premolar sector of both jaws and also at the level of the canines in the mandible.

La ortodoncia con brackets autoligables pasivos, de baja fricción y baja fuerza, produce remodelación alvéolodentaria; con aumento del diámetro transversal de las arcadas, especialmente en el sector de los premolares. El objetivo de este trabajo fue comparar las modificaciones del diámetro transversal en los modelos de yeso pre y post alineación dentaria con ortodoncia con brackets autoligables pasivos en pacientes con discrepancia dentaria moderada a severa. El estudio incluyó 28 pacientes de ambos sexos de entre 16 y 48 años de edad con discrepancia dentaria entre -6 y -16mm, tratados con brackets autoligables sistema Damon y arcos termo activables de Níquel-Titanio-Cobre. Con un paquímetro digital marca Mitutoyo, se tomaron 5 medidas por arcada: distancia entre caninos (C), primeros y segundos premolares (1 PM y 2 PM) y primeros y segundos molares (1M y 2M); pre y post alineación ortodóncica. Las variaciones registradas fueron evaluadas estadísticamente mediante Student T Test para muestras apareadas. La distancia promedio entre dientes varió con la alineación dentaria en ambos maxilares. Los mayores aumentos del diámetro transversal se registraron en las zonas de los premolares. Se produjeron también variaciones menores, aunque estadísticamente significativas, en los 2M del maxilar superior y en los C del maxilar inferior. En la alineación con brackets autoligables pasivos, hay incremento del diámetro transversal por desarrollo de las arcadas, principalmente en el sector premolar de ambos maxilares y en el maxilar inferior también a nivel de los caninos.

Expansion treatment using Invisalign®: Periodontal health status and maxillary buccal bone changes. A clinical and tomographic evaluation / Tratamiento de expansión con Invisalign®: estado de salud periodontal y cambios óseos maxilares. Evaluación clínica y tomográfica

ABSTRACT The aim of this study was to evaluate changes in periodontal status and maxillary buccal bone by considering clinical and tomographic parameters during the first year of orthodontic expansion with Invisalign® aligners. Upper first (1PM) and upper second (2PM) premolars of 19 patients with orthodontic expansion requirement treated with Invisalign® aligners were evaluated. Plaque index (PI), gingival index (GI), probing pocket depth (PPD), clinical attachment level (CAL) and cone beam tomographic (CBCT) records were collected at 76 sites before starting treatment (T0) and at 12 months (T1). Bone height was measured from cementoenamel junction (CEJ) to the crest cortical bone (CC). Bone thickness was measured at two levels: 4 mm (CEJ+4) and 6 mm (CEJ+6) apical to the CEJ. A descriptive analysis was made of the variations of bone thickness and height in a series of cases. The average expansion was 1.93 mm for 1PM and 167 mm for 2PM. Arithmetic mean of distance CEJ-CC in 1PM was 3.05 mm at T0, and remained at 3.05 mm at T1. Arithmetic mean of distance CEJ-CC in 2PM was 2.06 mm at T0 and 2.31 at T1. Post-expansion, most of the analyzed sites (86%) exhibited a bone thickness of ≥0.5 mm. The greatest variations between T0 and T1 were observed at the level of 1PM CEJ+ 4 and 2PM CEJ+ 6. The minimal changes in the clinical records (GI, PI, PPD and CAL) between T0 and T1 were compatible with the maintenance of gingivalperiodontal health. Invisalign® for expansion movements did not produce substantial changes in the evaluated periodontal clinical parameters or in the bone measurements. Removable appliances reduce plaque retentive factors and favor adequate oral hygiene.

RESUMEN El objetivo de este estudio fue evaluar los cambios en el estado periodontal y hueso facial maxilar a través de parámetros clínicos y tomográficos durante la expansión ortodóncica con alineadores Invisalign® en el primer año de tratamiento. Se evaluaron los primeros (1PM) y segundos (2PM) premolares superiores pertenecientes a 19 pacientes con requerimiento de expansión ortodóncica tratados con alineadores Invisalign®. Se registraron los índices de placa (IP), índice gingival (IG), profundidad al sondaje (PS) y nivel de inserción (NI) y registros tomográficos de haz cónico (CBCT) en 76 sitios antes de comenzar el tratamiento (T0) y a los 12 meses (T1). Se midió la altura ósea desde el límite amelocementario (LAC) hasta la cortical de la cresta (CC) y el espesor en dos niveles; a 4 mm (LAC+4) y a 6 mm (LAC+6) hacia apical del LAC. Se realizó un análisis descriptivo de las variaciones de la altura y espesor óseo en una serie de casos. La expansión promedio para 1PM fue de 1,93 mm y para 2PM fue de 1,67 mm. La media aritmética de LAC-CC en primeros premolares fue de 3,05 mm en T0 y se mantuvo el valor de 3,05 mm en T1. La media aritmética de LAC-CC en segundos premolares fue de 2,06 mm en T0 y 2,31 en T1. Post expansión, la mayoría de los sitios (86%) analizados exhibieron un espesor óseo ≥0,5 mm. Las mayores variaciones entre T0 y T1 se observaron a nivel de 1PM CEJ+4 y 2PM CEJ+6. Los registros clínicos (PI, GI, PPD y CAL) evidenciaron mínimos cambios entre T0 y T1, compatibles con el mantenimiento de la salud gíngivo-periodontal. El uso de Invisalign ® para movimientos de expansión no produjo cambios sustanciales en los parámetros clínicos periodontales evaluados ni en las mediciones óseas. La aparatología removible reduce los factores retentivos de placa bacteriana y facilita una adecuada higiene oral.

Prospective clinical study of transverse development with orthodontics with self-ligating brackets / Estudio clínico prospectivo del desarrollo transversal con ortodoncia con brackets autoligables

ABSTRACT Orthodontics with low friction, low force, passive self-ligating brackets produces alveolar-dental remodeling, resulting in an increase in the transverse diameter of the dental arches, especially in the premolar sector. The aim of this study was to compare the modifications of the transverse diameter in the pre- and post-dental alignment cast models with orthodontics with passive self-ligating brackets in patients with moderate to severe dental discrepancy. The study included 28 patients of both sexes aged 16 to 48 years with dental discrepancies between -6 and -16 mm, treated with self-ligating Damon brackets and thermally activated Nickel- Titanium-Copper arches. With a digital pachymeter, Mitutoyo brand, five measurements were taken per dental arch: distance between canines (C), first premolars (1PM), second premolars (2 PM), first molars (1M) and second molars (2M), before and after orthodontic alignment. The variations were statistically evaluated by Student T Test for paired samples. Average distance between teeth varied with dental alignment in both jaws. The greatest increases in transverse diameter were recorded in the premolar areas. Minor though statistically significant variations also occurred in the 2M of the maxilla and in the C of the mandible In alignment with passive self-ligating brackets, there is an increase in the transverse diameter due to the development of the dental arches, mainly in the premolar sector of both jaws and also at the level of the canines in the mandible.

RESUMEN La ortodoncia con brackets autoligables pasivos, de baja fricción y baja fuerza, produce remodelación alvéolodentaria; con aumento del diámetro transversal de las arcadas, especialmente en el sector de los premolares. El objetivo de este trabajo fue comparar las modificaciones del diámetro transversal en los modelos de yeso pre y post alineación dentaria con ortodoncia con brackets autoligables pasivos en pacientes con discrepancia dentaria moderada a severa. El estudio incluyó 28 pacientes de ambos sexos de entre 16 y 48 años de edad con discrepancia dentaria entre -6 y -16mm, tratados con brackets autoligables sistema Damon y arcos termo activables de Níquel-Titanio-Cobre. Con un paquímetro digital marca Mitutoyo, se tomaron 5 medidas por arcada: distancia entre caninos (C), primeros y segundos premolares (1 PM y 2 PM) y primeros y segundos molares (1M y 2M); pre y post alineación ortodóncica. Las variaciones registradas fueron evaluadas estadísticamente mediante Student T Test para muestras apareadas. La distancia promedio entre dientes varió con la alineación dentaria en ambos maxilares. Los mayores aumentos del diámetro transversal se registraron en las zonas de los premolares. Se produjeron también variaciones menores, aunque estadísticamente significativas, en los 2M del maxilar superior y en los C del maxilar inferior. En la alineación con brackets autoligables pasivos, hay incremento del diámetro transversal por desarrollo de las arcadas, principalmente en el sector premolar de ambos maxilares y en el maxilar inferior también a nivel de los caninos.

Teeth angulations after class II treatment with the Jones Jig followed by fixed appliances: A retrospective panoramic analysis.

OBJECTIVE: The purpose of this study was to compare the maxillary mesiodistal dental angulations of Class II malocclusion patients treated with the Jones Jig, followed by fixed appliances, with normal values of a historical control group, on panoramic radiographs. MATERIAL AND METHODS: The sample comprised 80 panoramic radiographs of 40 patients divided into two groups. Eligibility criteria included patients with predominantly dental Class II malocclusion; the presence of all teeth up to the second molars and no previous orthodontic treatment. The experimental group was composed of 60 radiographs of 20 patients treated with the Jones Jig distalizer followed by fixed appliances. The radiographs were taken at pre-treatment (T0), post-distalization (T1), and post-treatment (T2). The historical control group comprised 20 radiographs of 20 subjects with untreated normal occlusion. The mesiodistal axial angulations of all maxillary erupted teeth were evaluated with the Dolphin Imaging software. Intragroup comparisons in the experimental group were performed with repeated measures analysis of variance (ANOVA), followed by Tukey tests. The experimental group at T2 versus the control group were compared with t tests. RESULTS: After distalization, significant distal angulation of the molars (110.58°±8.54, P<0.000) and mesial angulation of the second (86.43°±8.08, P<0.000) and first premolars (80.11°±8.01, P<0.000) was observed. However, this was corrected after comprehensive fixed orthodontics (100.54°±6.53; 98.95°±7.00; 94.92°±6.44; P<0.000, for these teeth, respectively). Intergroup comparisons resulted in first molars, premolars, canines, and central incisors significantly more distally angulated in the experimental group, when compared to the control. CONCLUSIONS: In general, at the end of orthodontic treatment, patients treated with the Jones Jig distalizer followed by fixed appliances presented more distally angulated maxillary teeth when compared to an untreated group with normal occlusion.

Comparison of the Effects of Photobiomodulation with Different Lasers on Orthodontic Movement and Reduction of the Treatment Time with Fixed Appliances in Novel Scientific Reports: A Systematic Review with Meta-Analysis.

Background: The duration of orthodontic treatment is one of the most important aspects considered by patients. Photobiomodulation (PBM) depends upon the exposure of the tissue to particular, therapeutic wavelengths of light in the "therapeutic window" (from 600 to 1200 nm). PBM increases cell metabolism, which leads to higher ATP production. Increasing the amount of ATP in well-vascularized bone cells promotes cell proliferation and differentiation, creating a favorable environment for tooth movement. Objective: The aim of the study is to discuss and compare the use of PBM in accelerating the orthodontic movement and reducing the time of treatment. Materials and methods: A systematic review was conducted. Literature searches were performed using Medline (PubMed), Web of Science, and Scopus (from September 13 to September 20, 2019). The quality assessment was performed using the Jadad scale for reporting randomized controlled trials for randomized clinical trial and randomized control clinical trial studies, and the Newcastle/Ottawa Quality Assessment Form for case/control studies. Results: Thirty-three articles from PubMed, 46 from Scopus, 5 from Web of Science were selected. After removal of duplicates, 82 articles were analyzed. Subsequently, 74 articles were excluded because they did not meet the inclusion criteria. The remaining eight articles were included in the qualitative synthesis. Conclusions and summary: PBM is an efficient, effective, and noninvasive method to accelerate orthodontic tooth movement. PBM should be introduced into the daily practice of treating various malocclusions as an additional procedure. Intraoral application gives better results and its introduction to treatment seems more reasonable.

Stability of Class II corrections with removable and fixed functional appliances: A literature review.

BACKGROUND: Class II functional appliances have been used in orthodontics for over 100 years. Although the stability of corrections is one of the main goals of orthodontic treatment, there is a paucity of longitudinal studies on the long-term stability of treatment of Class II malocclusion based on functional appliances. METHODS: This narrative review attempts to summarize the limited related evidence available and discusses the clinical implications of important aspects related to occlusal and skeletal changes that arise after Class II malocclusion treatment with functional appliances. RESULTS: The occlusal changes obtained through Class II functional treatment do mostly exhibit long-term stability. While mild posttreatment changes occurred, they were most likely due to physiologic aging processes and not likely associated with actual treatment relapse. Long-term retention in the lower jaw would be particularly beneficial. A stable occlusion with good intercuspation in the posterior arches seems more likely to preserve a Class I occlusion after treatment through dentoalveolar compensatory mechanisms. After treatment, the maxilla and the mandible do grow anteriorly, with the mandible growing more than the maxilla. Patients treated with functional appliances are not likely to develop TMJ disorders over the long term. CONCLUSIONS: Long term skeletal corrections achieved with functional appliances seem to be overall stable. Class II molar and overjet relapses can be likely explained by a combination of tooth movement and an unfavorable posttreatment maxillomandibular growth pattern, especially when combined with unstable interdigitation of the posterior teeth. No specific intermaxillary retention approach has been assessed yet.

Class II malocclusion and ectopic canine treated with Pendulum appliance and TADs in a high-relapse potential Ehlers-Danlos patient: A case report.

The aim of this case report is to present the treatment plan, progress, and retention difficulty of an adolescent with a skeletal Class II malocclusion and ectopic canine eruption using a Pendulum appliance and skeletal anchorage. The patient was diagnosed with benign hypermobile EDS towards the end of treatment. This patient went through frequent relapses in a short period, which should be considered while treating patients with similar condition. This report emphasizes that forces applied in patients with Ehlers Danlos Syndrome will accelerate tooth movement but the clinicians should be cautious enough to avoid potential periodontal breakdown due to disturbaces in collagen remodeling.

Clear aligner hybrid approach: A case report.

INTRODUCTION: This case demonstrates that hybrid application of clear aligners can be a rational and efficient approach for treating malocclusions, as compared with a clear aligner therapy alone option in which the magnitude of some movements would require a higher number of aligners and likely further refinement. TREATMENT PLAN AND PROGRESS: After a first successful orthopedic phase face mask + rapid maxillary expansion (FM + RME), a diagnostic digital setup of the second orthodontic treatment phase was performed, opting for an esthetic approach to make the treatment as fast and efficient as possible. After positioning lingual tubes on both arches, digital models were obtained and lingual archwires, passing through the previously positioned tubes, were simulated digitally. Then, a virtual setup comprising 10 steps for both arches was planned. Aligners enveloped fixed partial lingual appliances, improving patient comfort and efficiency of overall treatment. Aligners were changed every 7 days and the second phase of treatment was finished in 10 weeks with good occlusion and alignment in both arches. The entire treatment of the Class III patient was completed in 13 months of active therapy. CONCLUSION: Combining clear aligner therapy and fixed lingual appliance is an esthetic means of treating malocclusions in a shorter treatment time with low costs and high efficiency.